Teltonika RUTX11100400 Industrial Cellular Router North America 4 RJ45
The Teltonika RUTX is a compact industrial router with 4G cellular. It has 4 RJ45 ports, 2 SIM slots, Dual band WiFi, 6 SMA connectors. North American operation. Housed in a metal DIN rail enclosure, it is made to be used in industrial applications that need speed and reliability.
PRODUCT FEATURES
* Compact Housing
* 4G LTE Cat 6
* Dual SIM
* Wave-2 802.11ac Dual Band WIFI and Bluetooth LE
* Global Navigation Satellite System (GNSS)
* (4) Gigabit Ethernet ports with up to 128 port/tag-based VLANs supported
* (1) Digital Input, (1) Digital Output on 4-pin power connector
* (4) WAN type LEDs,
* (2) Mobile connection type LEDs
* (5) Mobile connection strength LEDs
* (8) LAN status LEDs
* (1) Power LED
* (2) 2.4G and 5G WiFi LEDs
* (2) SIM slots (Mini SIM – 2FF), 1.8 V/3 V, external SIM holders
* (1) 4-pin power DC Connector
* (2) SMA for LTE
* (2) RP-SMA for WiFi
* (1) RP-SMA for Bluetooth
* (1) SMA for GNSS
* (1) USB A port for external devices
* Reboot/User Default/Factory reset button
* (1) Grounding screw
* Includes- Router, 2 LTE antennas, 2 WiFi antennas, 1 GNSS antenna, 1 Bluetooth antenna, SIM adapter kit, 1.5 meter Ethernet cable, RMS flyer, quick start guide
Mobile
Mobile Module- 4G (LTE) – Cat 6 up to 300 Mbps, 3G – Up to 42 Mbps
SIM Switch- 2 SIM cards, auto-switch cases: weak signal, data limit, SMS limit, roaming, no network, network denied, data connection fail
Status- Signal strength, SINR, RSRP, RSRQ, Bytes sent/received, connected band, carrier aggregation, IMSI, ICCID
SMS- SMS status, SMS configuration, send/read SMS via HTTP POST/GET, Email to SMS, SMS to Email, SMS to HTTP, SMS to SMS, SMS auto reply
USSD- Supports sending and reading Unstructured Supplementary Service Data messages
Black/White List- Operator black/white list
Multiple PDN- Possibility to use different PDNs for multiple network access and services
Band Management- Band lock, Used band status display
APN- Auto APN
Bridge- Direct connection (bridge) between mobile ISP and device on LAN
Wireless
Wireless Mode- 802.11b/g/n/ac Wave 2 (WiFi 5) with data transmission rates up to 867 Mbps (Dual Band, MU-MIMO), 802.11r fast transition, Access Point (AP), Station (STA)
WiFi Security- WPA3-EAP, WPA3-SAE, WPA2-Enterprise-PEAP, WPA2-PSK, WEP; AES-CCMP, TKIP, Auto Cipher modes, client separation
ESSID- ESSID stealth mode
WiFi Users- Up to 150 simultaneous connections
Wireless Hotspot- Captive portal (Hotspot), internal/external Radius server, built in customizable landing page
Ethernet
WAN- (1) WAN port (can be configured as LAN) 10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover
LAN- (3) LAN ports, 10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover
Bluetooth 4.0- Bluetooth low energy (LE) for short range communication
Network
Routing- Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP)
Protocols- TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet client, SNMP, MQTT, Wake on LAN (WOL), DLNA
VoIP Passthrough Support- H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets
Connection Monitoring- Ping Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspection
Firewall- Port forward, traffic rules, custom rules
DHCP- Static and dynamic IP allocation, DHCP Relay, Relayed
QoS / Smart Queue Management (SQM)- Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e
DDNS- Supported >25 service providers, others can be configured manually
Network Backup- VRRP, Mobile, Wired and WiFi WAN options, each of which can be used as backup, using automatic Failover
Load Balancing- Balance Internet traffic over multiple WAN connections
SSHFS- Possibility to mount remote file system via SSH protocol
Security
Authentication- Pre-shared key, digital certificates, X.509 certificates
Firewall- Pre-configured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T
Attack Prevention- DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)
VLAN- Port and tag based VLAN separation
Mobile Quota Control- Set up custom data limits for both SIM cards
WEB Filter- Blacklist for blocking out unwanted websites, whitelist for specifying allowed sites only
Access Control- Flexible access control of TCP, UDP, ICMP packets, MAC address filter
VPN
Open VPN- Multiple clients and server can be running simultaneously, 12 encryption methods
Open VPN Encryption- DES-CBC, RC2-CBC, DES-EDE-CBC, DES-EDE3-CBC, DESX-CBC, BF-CBC, RC2-40-CBC, CAST5-CBC, RC2-64-CBC, AES-128-CBC, AES-192-CBC, AES-256-CBC
IPsec- IKEv1, IKEv2, with 5 encryption methods for IPsec (DES, 3DES, AES128, AES192, AES256)
GRE- GRE Tunnel
PPTP, L2TP- Client/Server instances can run simultaneously, L2TPv3 support
Stunnel- Proxy designed to add TLS encryption functionality to existing clients and servers without any changes in the programs’ code
DMVPN- Method of building scalable IPsec VPNs
SSTP- SSTP client instance support
ZeroTier- ZeroTier VPN client support
WireGuard- WireGuard VPN client and server support
Modbus
TCP Slave-
ID Range- Respond to one ID in range [1;255] or any
Allow Remote Access- Allow access through WAN
Custom Registers- MODBUS TCP custom register block requests, which read/write to a file inside the router, and can be used to extend MODBUS TCP Slave functionality
TCP Master-
Supported Functions- 01, 02, 03, 04, 05, 06, 15, 16
Supported Data Formats- 8 bit: INT, UINT; 16 bit: INT, UINT (MSB or LSB first); 32 bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC), HEX, ASCII
MQTT Gateway- Allows sending commands and receiving data from MODBUS Master through MQTT broker
DNP3 Supported Modes- TCP Master, DNP3 Outstation
Data to Server Protocols- HTTP(S), MQTT, Azure MQTT, Kinesis
Monitoring & Management
WEB UI- HTTP/HTTPS, status, configuration, FW update, CLI ,troubleshoot, event log, system log, kernel log
FOTA- Firmware update from sever, automatic notification
SSH- SSH (v1, v2)
SMS- SMS status, SMS configuration, send/read SMS via HTTP POST/GET
Call- Reboot, Status, Mobile data on/off, Output on/off
TR-069- OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem
MQTT- MQTT Broker, MQTT publisher
SNMP- SNMP (v1, v2, v3), SNMP trap
JSON-RPC- Management API over HTTP/HTTPS
MODBUS- MODBUS TCP status/control
RMS- Teltonika Remote Management System (RMS)
IoT Platforms
Cloud of Things- Allows monitoring of: Device data, Mobile data, Network info, Availability
ThingWorx- Allows monitoring of: WAN Type, WAN IP, Mobile Operator Name, Mobile Signal Strength, Mobile Network Type
Cumulocity- Allows monitoring of: Device Model, Revision and Serial Number, Mobile Cell ID, ICCID, IMEI, Connection Type, Operator, Signal Strength, WAN Type and IP
Azure IoT Hub- Can send device IP, Number of bytes send/received, Mobile connection state, Network link state, IMEI, ICCID, Model, Manufacturer, Serial, Revision, IMSI, SIM State, PIN state, GSM signal, WCDMA RSCP, WCDMA EC/IO, LTE RSRP, LTE SINR, LTE RSRQ, CELL ID, Operator, Operator number, Connection type, Temperature, PIN count to Azure IoT Hub server
System Characteristics
CPU- Quad-core ARM Cortex A7, 717 MHz
RAM- 256 MB, DDR3
Flash Storage- 256 MB, SPI Flash
Firmware
Configuration-
WEB UI- Update FW from file, check FW on server, configuration profiles, configuration backup
FOTA- Update FW/configuration from server
RMS- Update FW/configuration for multiple devices
Keep Settings- Update FW without losing current configuration
Customization-
Operating System- RutOS (OpenWrt based Linux OS)
Supported Languages- Busybox shell, Lua, C, C++
Development Tools- SDK package with built environment provided
Location Tracking
GNSS- GPS, GLONASS, BeiDou, Galileo and QZSS
Coordinates- GNSS coordinates via WebUI, SMS, TAVL, RMS
NMEA- NMEA 0183
Server Software- Supported server software TAVL, RMS
Geofencing- Configurable multiple geofence zones
USB
Data Rate- USB 2.0
Applications- Samba share, USB-to-serial
External Devices- Possibility to connect external HDD, flash drive, additional modem, printer
Storage Formats- FAT, FAT32, NTFS
Input/Output
Input- (1) Digital Input, V detected as logic low, V detected as logic high
Output- (1) Digital Output, Open collector output, max output 30 V, 300 mA
Events- SMS, Email, RMS
Power
Connector- 4 pin industrial DC power socket
Input Voltage Range- 9 – 50 VDC, reverse polarity protection, voltage surge/transient protection
PoE (Passive)- Passive PoE. Possibility to power up through LAN port, not compatible with IEEE802.3af, 802.3at and 802.3bt standards
Power Consumption- 16 W Max
Environmental
Housing- Aluminum housing with DIN rail mounting option
Dimensions- 115 mm Width x 44.2 mm Height x 95.1 mm Depth (4.53″ x 1.74″ x 3.74″)
Mounting Options- DIN rail, flat surface placement
Operating Temperature- -40 C to 75 C (-40 F to 167 F)
Operating Humidity % non-condensing
IP Rating- IP 30 (Protected from objects 2.5 mm (0.1″) in diameter or greater)
Approvals
Regulatory & Type Approvals- CE/RED, RoHS, REACH
Vehicle- ECE R10 (E-mark)
EMI Standards- EN 55032:2015, EN 55035:2017, Draft ETSI EN V2.2.1, ETSI EN V2.1.1, Draft ETSI EN V3.2.0
ESD- EN :2009
RS- EN :2006 + A1:2008 + A2:2010
EFT- EN :2012
Surge Protection- EN :2014
CS- EN :2014
DIP- EN : RF Standards- ETSI EN V2.1.1, ETSI EN V2.1.1, ETSI EN V2.1.1
Safety Standards- IEC :2014 (Second Edition) EN :2014+A11:2017 EN 50385:2017 EN 62232: Additional Product Information